Service & Calibration of co-ordinate measuring machines. CMM Sales & Software. Agents worldwide.
Instrumentation Calibration & Repair: Our in house facilities enable us to offer a comprehensive calibration and re- calibration along with a repair service for a wide range of instrumentation including Pressure, Flow and Temperature equipment. All our Master Test Equipment has UKAS accredited certification and are directly traceable back to UKAS standards as well as conforming to an ISO 9001-2000 Quality System. Technical Support: All of our engineering staff are time served and have a considerable working knowledge of instrumentation and their associated systems. Between us, we have accumulated over 65 years experience in Process Control Systems. We offer an on site service to a number of our clients which enable us to carry out both calibration and servicing at the clients premises, therefore reducing downtime.
More...
Insteng Process Automation Ltd is an ISO9001:2008 registered company and is committed to providing quality products and services.
We offer a wide range of:
Industrial Measurements
System Integration
Site Calibration & Installation Services
Industrial Instrumentation Hire
Products i.e. Recorders, infrared pyrometers, flowmeters, Indicators, Transmitters & Converters from leading international suppliers such as Emerson, Honeywell, Ircon, Raytek, Status, Northern Design, Signatrol, GE Sensing encompass areas including:
Temperature and Humidity Monitoring
Flow
Energy, Pressure & Level Monitoring
Gas & Liquid Analysis
Intrinsic Safe and Surge
Panel/ Control Products
Control Interface/ Valves
Wireless, Data Communication and Collection
Our Systems Engineering division can offer instrument solutions, control panels, DCS & PLC Systems, dedicated products & small process skids along with full Scada & Control capability, installed & commissioned to give complete solutions.
More...
Calibrating services, electronic & temperature equipment & humidity & pressure. Also calibration laboratory, UKAS accredited
Manufacturers and suppliers of a range of calibration equipment covering temperature, pressure and electrical requirements from hand-held instruments to complete instrument workbenches and laboratory furniture. Full UKAS-accredited laboratory facilities for calibration and repair of a range of instruments.
Instrument engineering & pressure instrumentation hire services
We supply a full quality package. Scheduled Servicing, Calibration, Hire of all makes of scales. Sales Distributors for Mettler, Toledo and Ohaus. 24Hr Callout Availability. Suppliers of Balances, Bench Scales, Counting Scales, Floor Platforms, Reconditioned Scales (inc Atex)& Weighbridges. Industrial and Retail scales, Electronic or Mechanical. It Pays To ProWeigh.
More...
Established in 1995, TSL are the largest producer of UKAS calibrations in the North East. Situated in Jarrow our permanent laboratory has attained the requirements of BS EN ISO/IEC 17025 which is compliant with BS EN ISO 9001:2000. We meet the requirements of the automotive sector standard TS 16494 and have Rolls Royce approval. Our scope of accreditation extensively covers the majority of dimensional engineering equipment used in industry whilst our electrical scope encompasses a vast array of electrical test instruments including 16th edition test kit. We also have accreditations for Torque Tools, Pressure instruments, Temperature indicators and Surface tables on site. With a laboratory furnished with measurement equipment of the highest specification such as Sip and Carl Zeiss Jena interfaced with state of the art software and operated by top class engineers we welcome inspection anytime!
More...
Coventry Gauge (S & P) Ltd operate a UKAS Accredited Mechanical Calibration Laboratory in Poole Dorset. From this facility we service our customer base in the United Kingdom and Internationally in Europe and Asia. We also have a large gauge manufacturing facility of Screw thread and Plain limit gauges.
Screw & plain gauge manufrs
Thermocouple temperature sensor manufrs
Mobile calibration services
Based in Shoreham-by-Sea, West Sussex, covering the UK, Europe and USA, we're an independent UKAS calibration and test laboratory. UKAS flow calibration services and calorimetric heat exchanger testing on radiators, chargecoolers and oil coolers. Flowmeter calibration services, water flowmeters, gas flow meters, air flow meters, oil flow meters, fuel flow meters, mass flow meters. Pressure calibration, temperature calibration, humidity calibration engine test cell calibration, onsite calibration, electrical calibration, medical centre calibration, cruise ship calibration, data logger calibration. Kerosene, Jet A1, Shellsol, ISO 4113, skydrol, calibration fluid, turbine flowmeter calibration, mag flowmeter calibration, vortex flowmeter calibration, coriolis calibration, positive displacement calibration, laminar flowmeter, blowby meter calibration, max machinery calibration, krohne calibration, gas mass flow, ISO 17025, gravimetric calibration, Flowcal, flowmeter services, flowmeter calibration, traceable national standards, traceability, UKAS, NAMAS, DKD, A2LA, NIST, PTB, NEL, coolant flow, wind tunnel, thermal imaging.
More...
P L C computing & control systems
Onsite calibration engineers
Calibration Laboratory, UKAS accredited to ISO/IEC 17025, operating in the fields of: Dimensional, Electrical, Force, Mass, Pressure, Temperature & Torque.
Calibration test equipment suppliers
Distributors of sensors & recording instrument charts
Micron is a UKAS Accredited Calibration Laboratory (0720) east of Birmingham providing an impressive range of calibration services including electrical, dimensional and torque at our permanent laboratory in the West Midlands together with electrical and dimensional calibrations at our clients' sites where required. Calibration services, UKAS calibration, thread gauge calibration, instrument calibration, West Midlands, Birmingham.
More...
We guarantee a five working day turnaround on calibration of electrical/dimensional/pressure/torque/crimp/force & balances etc/ Including a dedicated repair facility. SCL also supply new instrumentation by most manufacturers, contact sales for advice on selection and a quotation.
Antech offers UKAS calibration over many fields including Electrical, Temperature, Pressure, Humidity, Air Temperature, Liquid Flow and Dimensional. Calibrations for direct traceability with National Standards using Antech's UKAS Calibration Laboratory encompassing BS EN ISO/IEC 17025, and standard calibrations to individual company's requirements. Both meet the requirements of BS EN ISO 9001:2000. We aim to continually increase our UKAS calibration capabilities and add to our already impressive UKAS schedule. On-site UKAS calibration available along with Pressure Relief Valve overhaul, servicing and certification in our UKAS Accredited Valve Testing Laboratory providing some of the best uncertainties of pressure measurement within the UK. Antech is committed to embracing the latest technologies to provide all our clients with maximum functionality through the Internet. Registered users can view the status of their calibration equipment, download their calibration certificates.
More...
Ukas accredited calibration & repair laboratory
Process Control calibration, service, sales and repair
